Controlled Temperature
Purpose
Provide variable temperature
Library
Thermal / Sources
Description
The Controlled Temperature generates a variable temperature difference between its two thermal connectors or between the thermal connector and the thermal reference. The temperature difference is considered positive if the terminal marked with a “+” has a higher temperature. The momentary temperature difference is determined by the signal fed into the input of the component.
Parameters
- Allow state-space inlining
For expert use only! When set to
onand the input signal is a linear combination of thermal measurements, PLECS will eliminate the input variable from the state-space equations and substitute it with the corresponding output variables. The default isoff.
Probe Signals
- Temperature
The temperature difference in degrees Celsius \((^\circ\mathrm{C})\).